JTX-618 is one part water - based adhesive for bonding sponge, with properties of Non-toxic, non-combustible, environmentally friendly, hard to crust, fast drying, excellent initial adhesion, high bonding strength, good heat resistance and aging resistance.
One,Typical Properties
| Appearance | milk white viscous liquid |
| Viscosity（mpa.s）25℃ | 300-800 |
| Solid content | 50±2% |
| PH | 8-9 |
| Execution conditions | Temperature between 5-35℃ |
| Bonding | Bond with in 60 seconds |
| Bonding strength | sponge teared first when peeling |
Two,How To Use
1、any contaminants that could impair adhesion.
2、Stir well before use
3、Adjust the roller to make sure a suitable glue-spread, fewer glue-spread may result in a bad bonding strength.
4、Bond the sponge within a certain time after coating.
5、Stand at well ventilated place after bonding for 24 to 48 hours.
Three,Notes
1、Shoud not mix with other adhesives together.
2、After long time standing it may become stratification, still can be used after stir thoroughly.
3、The adhesive must be sealed after used to prevent crust.
4、If exceed shelf life the adhesive can only be used after testing.
5、For industrial use only,do not eat.
6、Protect against sun exposure and frost during transportation and storage
Four,Packaging
50kg/drum, 1000kg/drum
Five,Torage
Stored in cool and ventilated place, protected from light, and within temperature from 5℃—30℃.
SHELF LIFE：6 months.