JTX-6153 is a one-component ultraviolet (UV) curing adhesive, which has the advantages of convenient use, fast curing speed, excellent bonding performance, transparent and non-yellowing film, and thixotropic properties. ). Suitable for self-adhesive glass, glass and metal bonding.

1. Performance parameters:

2. Construction method

1. Clean the surface of the material to be adhered. If there is any residual detergent after cleaning, it needs to be completely dried before applying glue.

2. Apply an appropriate amount of UV glue on the surface of the material to be bonded, then close it with another material to be bonded, and discharge possible air bubbles to distribute the UV glue evenly. Make sure that the bonding parts are covered with UV glue and finally fix the position.

3. Use a cloth or paper towel to wipe off the excess glue overflowing around the sticky material (do not use water, alcohol, acetone and other solvents for scrubbing). Do not let the glue contact UV light before this step.

4. The two bonded materials need to be irradiated by a UV lamp with a certain light intensity to fully cure the UV glue on the bonding surface (the irradiation time depends on the type, power, irradiation distance and light transmittance of the bonding material, etc.).

5. After UV lamp irradiation and curing, if there is still glue overflowing around the adhered material, it can be scraped off with a blade.

3. Precautions for use

1. At least one of the materials to be adhered is transparent.

2. The grease, moisture, impurities and flatness on the surface of the material to be bonded will directly affect the bonding quality. Be sure to wipe it dry and clean to ensure that the bonding surface is flat.

3. During the bonding process, be sure to discharge possible air bubbles; during the light curing process, ensure that the adhered parts can be irradiated by the UV lamp. Before positioning the material to be adhered, do not move it under the UV lamp, so as to avoid whitening and affect the appearance.

4. UV glue is an industrial chemical. Before the glue is cured by light, please take precautions to avoid direct skin contact; if you accidentally drop the skin, please wipe it with alcohol; if you are allergic to the skin, please seek medical attention immediately.

4. Packaging

50g/piece, 250g/piece, 1kg/piece

5. Storage

Store in a cool, ventilated and sealed condition away from light, away from heat and sunlight. The ideal storage temperature is 5~30℃, and the shelf life is not less than 6 months.