1. Product introduction:
Using high-purity basic raw materials, the two-component neutral silicone sealant is prepared by scientific process. It is cured at room temperature and forms a high-performance elastomer after curing. The cured elastomer has excellent electrical properties, excellent UV aging resistance, ozone resistance, yellowing resistance, high and low temperature resistance (-40℃~180℃), insulation, moisture-proof, rain-proof, dirt-proof, hail-proof Impact and good adhesion to most metal and non-metal materials, no pollution to the surrounding environment.
2. Product use:
Bonding and sealing of various plugs and light strips, lamp panels and bases.
The sealing of the frame of solar cell modules, the sealing of solar lamps, the bonding and sealing of junction boxes of solar cell modules.
Bonding and sealing of various household appliance panels, frames, brackets and pendants.
Bonding and sealing for other purposes.
3. Typical physical parameters:
| Serial No. | Item (numerical test temperature 25±2℃, temperature 60±5%) | Technical indicators | |
| machine glue | |||
| 1 | Exterior | Component A | white uniform paste |
| component B | White/black uniform paste | ||
| 2 | Density | Component A | 1.47±0.3 |
| component B | 1.47±0.3 | ||
| 3 | Mixing ratio (weight) | 1:1 | |
| 4 | Operation time (min) | ≤10 | |
| 5 | Initial solidification time (min) | ≤30 | |
| 6 | After fully cured | Tensile strength MPa | ≥2.0 |
| 7 | Elongation at break% | ≥100 | |
| 8 | Shear strength MPa | ≥1.5 | |
| 9 | Hardness after vulcanization (Shore A) | 60±5 | |
*: The above data are only typical values, which need to be determined by experiment for different devices.
4. How to use:
Mix the two components A and B according to the weight ratio A:B=1:1 and stir them evenly, and then they can be used. Note: Please do a compatibility test before use to determine whether the product meets the purpose of use; components A and B should be stirred evenly during use, otherwise the performance of the cured product will be affected; the prepared compound should be used within the operating time. complete.
Five, matters needing attention:
Store away from children. It is recommended to have a certain ventilation capacity in the production environment; production personnel should take appropriate protective measures, such as wearing protective glasses.
In case of accidental contact with eyes, rinse immediately with water and go to the hospital for examination.
6. Packaging and storage
1. The packaging specifications of this product are A: 2600ml/tube, B: 2600ml/tube. Or according to customer requirements.
2. Store in a cool and dry place below 27℃, the storage period is 9 months.
3. This product is non-flammable and explosive and can be transported as general chemicals.